BAUMULLER鮑米樂伺服驅動器維修:2028No supply voltage at the device設備無電源電壓。
In state transition from "Power-on Disable" to "Ready to Start", a three-phase supply is to be expected of the active mains rectifier on its terminals after closing the contact "Ready for Main Contactor ON" (X2-9; X2-10). 從“電源開啟-禁用”到“準備啟動”的狀態轉換三相電源應為有源主整流器閉合觸點“準備主接觸器”后的端子ON”(X2-9;X2-10)。
This error is triggered, if no three-phase supply is detected after closing the contact "Ready for Contactor ON" for 5 seconds. 如果在閉合觸點“接觸器接通準備就緒”5秒鐘后未檢測到三相電源,則會觸發此錯誤。
This error cannot be cleared by the user.
用戶無法清除此錯誤。
This error is reset by the device, if a three-phase supply is detected at the terminals of the active mains rectifier unit.
如果在有源主整流器單元的端子處檢測到三相電源,則該錯誤將由設備重置。
BM3401-L1OOO-AEOOOCB-O控制器修理:
BAUMULLER DA180M54A17-5,63KW
BAUMULLER 電機SS90F-GNF80-L
BAUMULLER 電機BFN 3-1-270 275V
BAUMULLER 電機BUS6-VO-0E-0036
BAUMULLER 電機BUM64A-300/390-54-E-O-003
BAUMULLER 電機BM1413-01-00-01
BAUMULLER BM4462-Sl2-01343-030
BAUMULLER BM4423-Sl1-21300-0308-1
BAUMULLER BM4422-Sl1-21300-0308-1
BAUMULLER BM4424-SI1-21300-0308-1
BAUMULLER BM4445-Sl2-21300-0308-1
BAUMULLER BM4145-ST0-00300-03
BAUMULLER BM4462-Sl2-01343-030
BAUMULLER BM4423-Sl1-21300-0308-1
BAUMULLER BM4422-Sl1-21300-0308-1
BAUMULLER BM4424-SI1-21300-0308-1
BAUMULLER BM4445-Sl2-21300-0308-1
轉載請注明出處:上海仰光電子科技專業伺服驅動器維修,伺服電機維修
本文鏈接:http://www.51yrjj.com/fuwu/Services_Show21868.htm
伺服驅動器維修 伺服電機維修 觸摸屏維修 變頻器維修
電話:021-50157782
手機:13817011982 微信同號
郵箱:shygdzi@163.com
聯系人:張工
網址:http://www.51yrjj.com
【 我們確保修好測試好給客戶!!!!】
下一篇:沒有了